Wavelength: | 1260-1650nm | Switch Time: | Less Than 35 Ms |
---|---|---|---|
Optical Power Resolution: | ±0.01 | Return Loss: | 55 DB |
High Light: | 55 dB OLP Switch,1U OLP system,1650nm OLP Switch |
1U Optical Line protection OLP 1:1
The Line protection is designed to safeguard networks from failure. Failures in high-speed networks have always been a concern of utmost importance. A single fibercut can lead to heavy losses of traffic and protection-switching techniques have been used as the key source to ensure survivability in such networks.
Protection architectures like Path protection and Line protection safeguard the above-mentioned networks from different kinds of failures. In path protection, a backup path is used from the source to its destination to bypass the failure. In Line protection, the end nodes of the failed link initiate the protection. These nodes detect the fault and are responsible to initiate the protection mechanisms in order to detour the affected traffic from the failed link onto predetermined reserved paths. Other types of protection are channel-, segment- and p-cycle protection.
Features
This OLP has the following features:
➢ Independent of data, format and wavelength;
➢ Highly configurable to fit network application;
➢Plug and play;
➢Use-selectable revertive and non-revertive modes;
➢Latching optical switch;
➢Front panel LED and remote alarm.
Environmental Requirements
Parameters |
Min. |
Max. |
Unit |
---|---|---|---|
Working Temperature | -10 | +60 | ℃ |
Storage Temperature | -20 | +75 | ℃ |
Humidity | 5 | 85 | % |
Mechanical / Power/ Interface Characteristics
Parameters |
Min. |
Typ. |
Max. |
Unit |
---|---|---|---|---|
Size | 1U H×D×W≤44x236x483 | mm | ||
Power Supply (1) | 85/170 | 110/220 | 132/264 | VAC |
Connectors | SC/PC |
Product Specification
Parameters | Unit | 1:1 | 1+1 | 1-1 |
Wavelength | nm | 1310±50nm & 1550±50nm | ||
Optical Power Range | dBm | +23~-50 | ||
Optical Power Accuracy | dBm | ±0.25 | ||
Optical Power Resolution Resolution | dB | ±0.01 | ||
Return Loss | dB | ≥55 | ||
PDL | dB | ≤0.05 | ||
WDL | dB | ≤0.1 | ||
Insertion Loss | dB | TX<1.2/RX<1.2 | TX<4/RX<1.2 | <1.2 |
Switching Time | ms | <35 | <15 | <15 |
Switching Lifetime | cycles | >107 | ||
Power-off Situations | Keep or switch to the secondary path |